April 4-8 2016 PARIS NORD VILLEPINTE

Fiche Exposant

MECANOLAV
Surface Finishing and heat treatment

38 RUE DE FLANDRE
ZAC DU PAYS DE BRAY
NEUFCHATEL EN BRAY
France

+33 02 35 93 00 78

contact@mecanolav.com

http://www.mecanolav.com

PRESENTATION
  • MecanoLav, Surface Alliance member provides optimal and customized wash solution to meet the requirements of cleaning customer needs through a complete range.

    Present on the aerospace, automotive, railway and general industry, MECANOLAV provides industrial parts washing solutions with the dedicate process: detergent spraying, forced immersion, vacuum solvent or ultrasonic.

NOMENCLATURE
  • Cleaning and preparing surfaces >> Machines and systems for cleaning >> Washing machines
  • Cleaning and preparing surfaces >> Machines and systems for cleaning >> Other cleaning systems
  • Cleaning and preparing surfaces >> Machines and systems for cleaning >> Mechanical cleaning and brushing equipment
  • Cleaning and preparing surfaces >> Machines and systems for cleaning >> Ultrasonic cleaning
  • Cleaning and preparing surfaces >> Treatment by impact >> Pickling (Equipment and installation for treatment by impact)
  • Cleaning and preparing surfaces >> Treatment by impact >> Ultrasound
  • Cleaning and preparing surfaces >> Electrolytic and chemical processes >> Degreasing machines
  • Cleaning and preparing surfaces >> Electrolytic and chemical processes >> Degreasing (soaps, solvents)
  • Pollution prevention and treatment >> Water and sludges >> Evaporation (For prevention and pollution treatment of waterand sludges)
Brands
  • Membre de Surface Alliance : Lien vers site Surface Alliance

    Les entreprises allemandes EMO Oberflächentechnik GmbH, Hösel GmbH et LPW Reinigungssysteme GmbH forment, en partenariat avec Höckh Metall-Reinigungsanlagen GmbH et MecanoLav (France), un réseau performant nommé Surface Alliance.

    Œuvrant au niveau international, ces six spécialistes du nettoyage industriel de pièces mécaniques se complètent mutuellement afin d’offrir une solution optimale aux problématiques exigeantes propres au secteur du nettoyage industriel.

Products
  • MecanoFAST - Clean & dry in 30 seconds

    The MecanoFAST concept is a targeted spraying of the part at very high flow, followed by compressed air blowing, to degrease, clean and dry parts in few seconds.

    FAST

    • 30 seconds cycle time,
    • Small footprint allow integration within the manufacturing cell,
    • Single part handling fit your production, no buffer required,
    • Easy access for manual or automated loading/unloading,
    • Extremely fast change over from one part to the other,

    COMPACT

    • 2m² / 22 ft² footprint,
    • 700 mm/ 28" wide make it perfect for cell integration,
    • 3 sides access for maximum loading/unloading efficiency,
    • Safe loading with light curtains,
    • Robot automation friendly,
    • Rotary loading table, conveyor belt and pallet changer available,
    • Loading/unloading at the same location reduce material handling,

    EFFICIENT

    • Washing quality that feet your needs thanks to : 3D modeling of the washing tools, 3 level filtration system, particle cleaning range within 150 to 600 µm,
    • Energy saving : Heating ON/OFF scheduling, auto sleepmode, eco-design,
    • Easy access for maintenance through wide panels,
    • Enhanced reliability through top bands components.
    https://www.youtube.com/watch?v=fQpVtJv2VMk

  • ECO - Lid washing machine

    The ECO range represents robustness and sustainability alliance.

    Three U-shaped ramp fed by a spraying pump a detergent / water mix closer in the parts set on a turnplate driven by a gear motor.

    SPECIFICATIONS

    • Turnplate diameter : 780 to 1100 mm,
    • Maximum load : 150 to 500 kg,
    • Maximum pressure : 2 to 15 bar,
    • Maximum temperature : 60 to 80°C,

    APPLICATIONS

    • Degreasing,
    • Manufacturing cell parts washing,
    • Surface treatment,
    • Reconditioning and renovation parts washing,
    • Tools cleaning,

    CHARACTERISTICS

    • Closed circuit washing,
    • Strong stainless steel made,
    • Save floor space,
    • Save energy and detergent cost,
    • Durability and low maintenance costs.

  • MecanoJET - Basket parts washing process

    The MecanoJET range combines the concept of spraying washing and degreasing in basket with the compactness needed for its integration within the manufacturing cell.

    SPECIFICITIES

    • Configurable rotation modes: full rotation, adjustable oscillation and without rotation,
    • Basket dimension : 525 x 320 x 200 mm to 670 x 480 x 300 mm,
    • Adjustable : 1 or 2 tanks (washing and rinsing),
    • Hot air drying with compressed air blowing,
    • Door : Vertical with fix table or tilting with slinding plate,

    APPLICATIONS

    • Manufacturing cells washing,
    • Basket washing process,
    • Bulk parts washing,
    • Complex form parts washing,

    CHARACTERISTICS

    • Closed circuit washing,
    • Strong stainless steel made,
    • Save floor space,
    • Save energy and detergent cost,
    • Thermal insulation panel.

  • MAXIMA/MB - Spraying chamber

    The MAXIMA/MB range process is similar to ECO range process, the robustness and durability are the main values.

    With the ability to integrate several tanks.

    Three U-shaped ramp fed by a spraying pump a detergent / water mix closer in the parts set on a turnplate driven by a gear motor.

    SPECIFICATIONS

    • Turnplate diameter : 950 to 2320 mm,
    • Maximum load : 1000 to 2000 kg,
    • Maximum pressure : 4,5 to 30 bar,
    • Maximum temperature : 60 to 80°C,
    • Tanks : 1 to 4 tanks,
    • Door : Vertical with trolley or tilting, in that case door is use as loading table,

    All these specifications are customizable as needed.

    APPLICATIONS

    • Degreasing,
    • Parts washing between processes,
    • Surface treatment,
    • Reconditioning and renovation parts washing,
    • Parts washing before assembly and control,
    • Before painting,
    • Final washing,

    CHARACTERISTICS

    • Closed circuit washing,
    • Strong stainless steel made,
    • 1 to 4 tanks,
    • 6 standard size,
    • Durability and low maintenance costs.

  • Tunnel - Modular washing

    Washing tunnel is made of one or more module, it’s corresponding to different cycle step (washing, rinsing...). It work in closed circuit and degrease parts with water and detergent mix at 1 to 5%. The parts are scrolled continuously on the conveyor system.

    SPECIFICITIES

    • Modular : opportunities to add multiple modules as needed (degreasing, pre-washing, washing, drying, blowing, anticorrosion treatment ... etc),
    • Customizable: The useful loading width and height is adjustable according to the parts size,
    • Chain conveyor systems, pallet or belt, with the possibility of integrating transbordeur,

    APPLICATIONS

    • Continuous mechanical parts washing,
    • Parts washing before assembly,
    • Parts degreasing between processes,
    • Washing according to cleanliness standards,

    CHARACTERISTICS

    • Flexible and modular design,
    • Stainless steel made,
    • Thermal insulation panels,
    • Easy maintenance with easy access to chamber and tanks.

CONTACT
  • Matthieu VALLOIS
    02 35 93 98 40
    matthieu.vallois@mecanolav.com

  • Alexandre MASURIER
    02 35 93 00 78
    am@mecanolav.com

Presse


Top news